Related Topics
Receiving PTT Broadcasts
Reply to PTT Broadcasts
When a broadcast ends, the broadcast enters a 10-second waiting period. During this period, the
channel remains open to receive or send additional broadcasts.
Procedure
1 During the 10-second waiting period, press and hold Talk.
2 Begin talking.
The broadcast is sent to all people listening on the channel.
3 When you finish talking, release Talk.
The broadcast enters another waiting period until someone broadcasts again. If no activity
occurs within the waiting period, the channel closes and no more broadcasts can take place.
Related Topics
Broadcasting Messages with Push to Talk
End PTT Broadcasts
After you end a broadcast, the channel remains open so others can respond.
Procedure
•
Do one of the following:
◦
Release Talk.
The broadcast enters a waiting period. You can initiate another broadcast on another
channel when the waiting period ends.
◦
Select End PTT.
The broadcast ends. You cannot resume the broadcast by pressing and holding Talk on the
same channel. You can immediately initiate another broadcast on another channel.
Related Topics
Broadcasting Messages with Push to Talk
Printed from Polycom, Inc. (http://documents.polycom.com) #{renderLang "en" MsgPDFPage} 138
To Next Page
Loading...
