Procedure
1 Go to Settings > Basic > Preferences.
2 Select Headset > Hookswitch Mode.
3 Select Regular Mode.
4 Remove the EHS adapter from the serial port on the back of the phone.
Related Topics
Using a Headset with Your Phone
Controlling Your Phone with Polycom Desktop Connector
The Polycom Desktop Connector (PDC) enables you to use your computer mouse and keyboard to
navigate and enter information on your phone.
The PDC is compatible with any language your phone and computer supports. Contact your system
administrator to find out if your phone supports the PDC.
Related Topics
Phone Accessories and Computer Applications
Setting Up and Enabling the Polycom Desktop Connector
Before you can enable and use the PDC, you need to download the PDC application from the Polycom
Voice Applications website, install the application on your computer, and activate PDC on your phone.
To enable the PDC, you need to enter your computer access credentials to the phone. You can provide
this information to your phone using one of two methods: direct or indirect. The method you use
depends on how your phone and computer are set up.
After you install the software, you need to make changes to your phone to establish a connection to
your computer and provide an exception to your firewall or anti-virus software to unblock the PDC
program.
Related Topics
Controlling Your Phone with Polycom Desktop Connector
Connect Using the Direct Method
If your phone and computer are connected using an Ethernet cable, use the direct method to enable
the PDC. Using this method, your phone automatically detects your computer's access credentials.
Printed from Polycom, Inc. (http://documents.polycom.com) #{renderLang "en" MsgPDFPage} 184
To Next Page
Loading...
