Connecting to a Wireless Network
You can connect to a wireless network from your USB-enabled VVX phone using the Poly Wi-Fi
wireless network adapter to access all phone services over the wireless network.
You cannot use a wireless network and Ethernet simultaneously to connect VVX phones to your
network. Enabling wireless connectivity automatically disables the Ethernet port.
Add a Wireless Network
You can manually add a new wireless network on from the Basic menu.
Procedure
1
Go to Settings > Basic > Wi-Fi.
2
Select Add Network .
3
Enter the wireless network in SSID.
4
From Security select the network security type and other relevant security parameters along
with any other wireless settings.
5
Save these selected settings.
Related Topics
Connecting to a Wireless Network
Enable Wireless Network Connectivity
You can enable wireless connectivity for your USB-enabled VVX phone using the Poly Wi-Fi wireless
network adapter.
Prerequisite
Before setting up a wireless network, make sure that you connect the VVX phone to its power adapter.
Note VVX phones do not support WEP.
Printed from Polycom, Inc. (http://documents.polycom.com) #{renderLang "en" MsgPDFPage} 150
To Next Page
Loading...
