2 On your phone, go to Settings > Basic > PDC Configuration.
3 From the PDC Configuration screen, set the Status field to Enabled.
4 In the Phone Orientation field, specify whether your phone is to the left or right of your
computer monitor.
5 In the Desktop User field, enter your Windows login name.
6 In the Server Address field, enter your computer's IP address or FQDN.
The IP address enables your phone to locate and identify your computer on the network.
7 Select Save.
Your settings are saved and the Basic screen is displayed with a message prompting you to
allow sharing with your computer.
8 Select Yes.
A dialog box is displayed on your computer asking if you wish to allow remote control of your
phone.
9 Select OK to complete the setup process.
The PDC icon turns red, indicating that you successfully enabled the PDC program.
Related Topics
Setting Up and Enabling the Polycom Desktop Connector
Disable the Polycom Desktop Connector
If you disable the PDC, you can no longer use your mouse and keyboard to control and enter
information on your phone.
Procedure
•
Do one of the following:
◦
On your computer, right-click the PDC icon on your taskbar and click Exit.
◦
On your phone, navigate to the PDC Configuration menu and set the Status to Disabled.
In the system tray, the PDC icon turns grey.
Related Topics
Setting Up and Enabling the Polycom Desktop Connector
Printed from Polycom, Inc. (http://documents.polycom.com) #{renderLang "en" MsgPDFPage} 186
To Next Page
Loading...
