Polycom VVX 150 - Enable Do Not Disturb

•
When the administrator enables hybrid line registration on the phone, you can choose All to
enable DND on all the registered lines.
•
If you have new messages or you have enabled call forwarding, the messages or forwarding
icon display instead of the DND icon.
•
The message Do Not Disturb displays in the status bar on all phones.
•
The DND icon on the Home screen changes from DND Disabled to DND Enabled .
For VVX 150 phones, the line icon changes to .
Note When you set your presence status to Do Not Disturb and enable DND on your phone,
a message reflecting your Do Not Disturb status scrolls under the time display. The DND
icon doesn’t display in the status bar.
Related Topics
Ignoring or Rejecting Incoming Calls
Enable Do Not Disturb
Enable DND to prevent your phone from ringing and to send all incoming calls to voicemail. The phone
logs all calls you receive while on DND in the Recent Calls list.
DND on shared lines disables ringing only. A visual notification of the call still displays, and you can
answer or ignore the call.
Note When you are signed into a host phone as a guest, you can only enable Do Not Disturb if
the server-based Do Not Disturb feature is enabled on the phone. If server-based DND is
disabled on the phone, you cannot use DND on the host phone. Contact your system
administrator for help enabling this feature.
Procedure
•
Select DND.
Related Topics
Rejecting Calls with Do Not Disturb
Reject Calls with Do Not Disturb on Multiple Lines
Use Do Not Disturb to reject incoming calls when you're busy.
Note By default, Do Not Disturb applies to all lines on your phone. Your system administrator
can enable you to select the lines DND applies to.
Printed from Polycom, Inc. (http://documents.polycom.com) #{renderLang "en" MsgPDFPage} 59