Polycom VVX 150 - Listen to a PTT Broadcast During an Active Call; Receiving PTT Broadcasts When Not in an Active Call

How you receive a PTT broadcast depends on the broadcast priority, whether you are in an active call,
and whether your phone is set up to receive broadcasts during active calls.
When you enable Do Not Disturb on your phone, you receive only Emergency broadcasts. Non-
emergency broadcasts do not display or play on your phone.
Related Topics
Broadcasting Messages with Push to Talk
Listen to a PTT Broadcast during an Active Call
How you handle a broadcast when you are in an active call depends on the broadcast priority and if
your phone is set up to receive a broadcast when you are in an active call.
The following occurs when you receive a broadcast during an active call:
•
When your phone is set up to receive Normal broadcasts during an active call, the broadcast
immediately plays. You hear both the active call and the broadcast.
•
When your phone is not set up to receive broadcasts during active calls, the broadcast is
displayed as a Pending broadcast.
•
When the broadcast is a Priority or Emergency broadcast, the broadcast plays immediately. You
hear the active call and the broadcast.
Procedure
•
Do one of the following,
◦
For broadcasts that play automatically during a call, hold the call to hear only the broadcast.
◦
For Pending broadcasts, select Accept or hold the call.
Related Topics
Receiving PTT Broadcasts
Receiving PTT Broadcasts When Not in an Active Call
When you receive a broadcast and you are not in an active call, the broadcast immediately plays,
regardless of the broadcast priority.
When you adjust the volume of a non-emergency broadcast, your phone retains the adjusted volume
for all subsequent non-emergency broadcasts. However, only system administrators can adjust the
volume level of an Emergency broadcast.
Printed from Polycom, Inc. (http://documents.polycom.com) #{renderLang "en" MsgPDFPage} 137