Polycom VVX 150 - Disconnect a VVX EM50 Expansion Module

4 Insert the supplied screw into the bracket screw hole and, using a screwdriver, secure the
expansion module to the phone, as shown.
The LED lights on the module's line keys flash red and green as the module starts up.
Related Topics
Poly VVX EM 50 Expansion Modules
Disconnect a VVX EM50 Expansion Module
You can disconnect a VVX EM50 expansion module from an IP phone.
Procedure
1
Power off the VVX 450 business IP phone.
2
Lay the connected phone and expansion module face-down on the table.
3
Using the screwdriver, remove the supplied screw from the bracket screw hole, as shown.
4
Detach the USB plug on the VVX EM50 expansion module from the phone.
Related Topics
Poly VVX EM 50 Expansion Modules
Printed from Polycom, Inc. (http://documents.polycom.com) #{renderLang "en" MsgPDFPage} 195