Polycom VVX 150 - Page 38

If the call recipient has an active call, the recipient can choose to answer the intercom call. Otherwise,
the phone answers the intercom call automatically after their active call ends.
Related Topics
Placing Audio Calls
Place an Intercom Call
You can place an intercom call from your phone to quickly relay a message to a contact.
Note Your system administrator can set up your phone to automatically call a specific contact
when you select Intercom. If your phone is set up this way, select Intercom and wait for
your contact to answer before speaking your message.
Procedure
1 Select Intercom.
2 Enter a number or select a contact.
3 Select Dial.
The phone plays a tone and the contact’s phone answers the call automatically.
4 After your contact answers the call, speak your message and select End Call.
Related Topics
Placing Intercom Calls
Place an Intercom Call During a Call
You can place an intercom call to another contact during an active call.
Procedure
1 Select Hold > Intercom.
The active call goes on hold and the dialpad displays.
2 Enter a number or select a contact.
3 Select Dial.
The phone plays a tone and the contact’s phone answers the call automatically.
4 After your contact answers the call, speak your message and select End Call.
5 Select Resume.
Printed from Polycom, Inc. (http://documents.polycom.com) #{renderLang "en" MsgPDFPage} 38