9. Reinstall the hood cover, see "Covers and Panels Replacement" on page86, and
left/right Landing Trim covers, see "Covers and Panels Replacement" on page86.
10. Connect the power cord and switch the ON/OFF circuit breaker ON.
11. Reset the maintenance Belt Rating after a new deck/belt replacement. Open the
Maintenance Belt Rating screen and select Replacement (Access Hardware Val-
idation service menu (51765761) , select : Maintenance > Belt Rating> Replace-
ment).
12. Do the Operation Verification tests (see "Operation Verification" on page24) and
return to service.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 200
6 Replacement Procedures
Running Belt and Deck Replacement Procedure
To Next Page
Loading...
