2. Locate the latest (most current) P82 software version.
3. Click the download software link.
4. Enter the Sign in dialog box Username and Password:
Username: software
Password: D0wnl0ads!
5. Select OK to download the P82 software zip file. The browser will automatically begin
the download process after selecting OK.
Installing the operating system software
1. On a USB flash drive, create a folder named “precor” in the root directory.
2. Move the downloaded software zip file to the USB flash drive by right-clicking the zip
file, selecting “extract all.”, browsing to the "precor" flash drive folder, and selecting
"Extract" to download.
IMPORTANT: You must place all software files into the “precor” folder on your USB
flash drive. Failure to follow the instructions exactly will result in the console not recog-
nizing the available software update on the USB flash drive.
3. Insert the updated USB flash drive into the console chin USB port.
IMPORTANT: The microSD card MUST be properly seated (locked in place) in the
microSD port or the chin USB port will not load the software, see "" on page8.
4. Access the Diagnostic menu (access code 51765761).
5. From the Settings menu, select the Available Updates menu to open the Available
Updates screen.
Note: If the menu item is "No Available Updates, the software was not properly
installed on the flash drive. Remove the USB flash drive and reinstall the latest soft-
ware onto the USB flash drive "precor" folder.
6. Select (highlight) the latest software version and select INSTALL to begin the software
installation.
41
To Next Page
Loading...
Need help?
General
