Standard Error Codes
About
There is a set of standard error codes implemented across Precor exercise equipment. Error
codes are system generated error codes designed to detect and report fault conditions. Each
error code is associated with a particular system or component fault condition. The main-
tenance software monitors error code event conditions, when a fault is detected, the error
code is stored in the Error Log (or CPA Event Log) along with the event mileage, hours, and
motor current.
Error code numbers range from 01 to 99. There are also a small number of alpha and alpha-
numeric codes. Most, but not all error codes are grouped into numeric ranges to help easily
identify common system issues. Refer to the Error Code Troubleshooting Guide for a com-
plete list of error codes and troubleshooting information.
IMPORTANT: Error Code description and Troubleshooting information is contained in
the
Error Code Troubleshooting Guide
, see Error Code Guide.pdf.
68
9 Troubleshooting
Standard Error Codes
To Next Page
Loading...
