Precor Experience P62 User Manual

l Maintenance counter operation: The counter starts at 1000 miles and counts down the
miles of active use to 0 miles. When the counter reaches zero, the ASL will begin
pulsing blue indicating preventative maintenance is due.
l Maintenance counter operation: The counter starts at 250 hours and counts down the
hours of active use to 0 hours. When the counter reaches zero, the ASL will begin
pulsing blue indicating preventative maintenance is due.
l Viewing the ASLlight
o
When in active use with exerciser striding.
o
When the exerciser presses the Wakeup switch located on the rear of the unit.
o
For 90 seconds after the exerciser ceases striding.
o
For 90 seconds after the Wakeup switch is pressed.
ASL States
The ASL utilizes a combination of blue and yellow lights to indicate the current operational
machine status.
ASL State DESCRIPTION
OFF The unit is powered OFF or there is no power to the LPCA or some other
hard failure. On P10, P30, and P30i consoles the ASL brightness is set to
OFF.
Blue Solid Normal operation Indicates that the ASL has not detected any logged
error codes.
Blue Pulsing Preventative maintenance reminder.
Treadmills: A belt rating of 0 or 1 will cause a blue pulsing ASL light indic-
ating that there is a problem with the running belt/deck and is in need of
servicing or replacement.
Ellipticals: The maintenance counter starts at 1000 hours and counts
down the active use hours to 0. When the counter reaches zero hours,
the ASL will begin pulsing blue indicating preventative maintenance is
74
9 Troubleshooting
Active Status Light (ASL)

Precor Experience P62 Specifications

General

Brand	Precor
Model	Experience P62
Category	Music Mixer
Language	English