8. Remove the console from the base.
Installation Procedure
Installation Procedure
Basic Installation Steps
Installing the console entails completing each one of the following basic steps:
1. "Locating the Interface Cables and Hardware" below (first time installations)
2. "Installing the Power Supply " on page23 (first time installations or replacement).
3. "Installing the Console " on page23
4. "Updating the operating system software" on page27.
5. "Registering the console" on page27
6. "System Settings Setup (Display & Workout Limits)" on page28
7. "TV Channel Guide Setup" on page28
8. "Verify the console operation" on page28
Locating the Interface Cables and Hardware
(First time Installations only)
1. Locate hardware and interface cables.
a. Unpack the contents of the console shipping box:
l the Console
l
the P82 Installation Guide (Literature kit package)
l the accessory box (contains interface cables and hardware).
b. Unpack the accessory box contents:
l the Ethernet (LAN) cable
l the RF (TV) cable
l the console power cable
l the AC/DC power adapter brick
l the adapter brick input power cord (self-powered machine)
l the adapter brick input power adapter cable (treadmills)
l the adapter brick output power cable
l the Entertainment Plate (Accessory Jack).
Media Adapter Consoles
l the IR Transmitter interface cable
21
To Next Page
Loading...
Need help?
General
