Precor Experience P62 - Updating the Operating System Software; Registering the Console

8. For treadmill installations, reinstall the treadmill dash back cover, see the treadmill
model specific Service Manual (download from the Precor Partner's website).
9. Power up the console:
a. For treadmills, connect the treadmill power cord and switch the ON/OFF circuit
breaker ON
b. For self-powered equipment, plug in the console power supply input power cord.
10. Verify that the console successfully powers up to the "Welcome" banner.
Updating the operating system software
The installed console may not have the latest operating system version installed. This pro-
cedure will download and update the console with the latest operating software version.
1. Update the console Operating System software to the most current version, see "How
to Update the console operating system software" on page40.
Registering the console
This procedure provides instruction to register the console and base with Precor PBS (Preva
®
Business Suite). The console must be connected to the internet to register the console.
Note:This procedure assumes that the facility internet service provider has provided
a wired Ethernet LAN connection.
1. Register the console, see "Registering the Console" on page36.
27