Service menu access
Steps
1. Make sure the console is set to the Welcome banner.
2. Press and hold the VOL down key while pressing CH up >CH down > CH down > CH
up:
3. At the Sign-In screen, type in the service access code.
Touchscreen Calibration shortcut
Console shortcut to access the Touchscreen Calibration test.
Steps
1. Make sure the console is set to the Welcome banner.
2. Press and hold the VOL down hardkey while pressing CH up > Pause > Pause > CH
up:
P82 Console 46
7 Standard Service Menus
How to Access the Service Menus