The P62, P80, and P82 CPA Event Log provides the same error code data found in the P10,
P30, and P30i Error Log in addition to the event date & time stamp information. The "CPA
ERROR" identifier in the error code output message indicates that this is a machine fault error
code that can be used along with the
Error Code Troubleshooting Guide
to help resolve the
issue.
Typical CPA Event Log data:
l Error Code Data
o
Event Time & Date Stamp
o
Error Code Number
o
Error Code Description
o
Odometer
o
Hours
o
Motor Current*
o
.Input Line Current*
o
Input line voltage*
o
Buss Voltage*
o
OEM Factory only data
Note: * machine dependent parameter.
Removing Error Codes:
Unlike the Error Log used on P10, P30, and P30i, you cannot manually delete (clear) error
codes from the CPA Event Log (or Event Log).
71
To Next Page
Loading...
Need help?
General
