15
29. AUDIO/VIDEO 1 IN/OUT - (6 RCA Jacks; 2 S-Video Jacks) Connect to the left and right analog line level audio and composite
video inputs and outputs of an audio/video recorder for recording and playback of analog audio and composite video (de-
fault conguration). The Audio/Video 1 OUT jacks output analog line level audio and composite or S -Video from the currently
selected source. (If the selected source has line level audio and composite or S-Video connections and those connections are
selected in the Source Setup.) Audio/Video 1 is selected as a source or for playback by repeatedly pressing the Source button
on the M80 Front Panel or by pressing the 1 button on the M80 Remote Control. The Front Panel Display will indicate Source 1.
Audio/Video 1 can be renamed and optional digital audio, S-Video, component video and HDMI inputs can be congured in
the Source Setup under Source 1.
Note: HDMI inputs are not down-converted to analog line level audio or composite, S or component video and cannot be
recorded. Multi Input audio is not downmixed and cannot be recorded.
AUDIO/VIDEO 1 IN - Connect to the left and right analog line level audio and composite or S-Video outputs of an audio/
video recorder.
AUDIO/VIDEO 1 OUT - Connect to the left and right analog line level audio and composite or S-Video inputs on an au-
dio/video recorder.
30. MDP (Metadata Port) - Connect to the 3-circuit (stereo) 3.5mm mini jack on a Procient Audio iPod Dock. This connection
sends control to and receives metadata from an iPod connected to the iPod Dock. See: Procient Audio iPod Dock Installa-
tion and User Guide for complete information.
Note: The iPod Dock requires separate analog audio connections to the M80 Audio 4 Inputs for audio signal. M80 Source 4 is
congured specically for iPod/iPod Dock.
31. AUDIO/VIDEO 2 - (3 RCA Jacks; 1 S-Video Jacks) Connect to the left and right analog line level audio and composite video
outputs of a DVD Player, Satellite Receiver, Cable Box or other audio/video device (default conguration). Audio/Video 2 is
selected by repeatedly pressing the Source button on the M80 Front Panel or by pressing the 2 button on the M80 Remote
Control. When selected, the Front Panel Display will indicate Source 2. Audio/Video 2 can be renamed and optional digital
audio, S-Video, component video and HDMI inputs can be congured in the Source Setup under Source 2.
32. AUDIO/VIDEO 3 - (3 RCA Jacks; 1 S-Video Jacks) Connect to the left and right analog line level audio and composite video
outputs of a DVD Player, Satellite Receiver, Cable Box or other audio/video device (default conguration). Audio/Video 3 is
selected by repeatedly pressing the Source button on the M80 Front Panel or by pressing the 3 button on the M80 Remote
Control. When selected, the Front Panel Display will indicate Source 3. Video 3 can be renamed and optional digital audio, S-
Video, component video and HDMI inputs can be congured in the Source Setup under Source 3.
33. AUDIO/VIDEO 4 (iPod) - (3 RCA Jacks; 1 S-Video Jack) Connect to the left and right analog line level audio outputs of a Pro-
cient iPod Dock (default conguration). Audio/Video 4 is selected by repeatedly pressing the Source button on the M80 Front
Panel or by pressing the 4 or iPod button on the M80 Remote Control. When selected, the Front Panel Display will indicate
iPod. Audio/Video 4 is dedicated for use with the iPod Dock and cannot be renamed. Only the Trigger Out conguration for
Audio/Video 4 can be changed in Source Setup.
34. RS232C - (1 DB9F Terminal) This terminal is only used during factory rmware updates. Do not make any connections to this
terminal.
M80 REAR PANEL FEATURES
To Next Page
Loading...