Proficient Audio Systems M80 - Page 97

97
TROUBLESHOOTING
PROBLEM SOLUTION
Remote Control
Remote does not control M80 a) Replace batteries in remote.
b) Conrm direct ‘line-of-sight’ from the remote to the IR
Sensor on the M80 Front Panel.
c) Block any bright light or high ambient light that may be
saturating the IR Sensor with light noise.
d) Conrm connection of external IR Receiver (if used).
iPod a) Conrm Procient iPod Dock connection to M80 iPod Dock
Port.
XM a) Conrm XM Ready Tuner connection to M80 XM Port.
Zone 2
No Audio a) Conrm Zone 2 source analog line level audio connections.
b) Conrm source analog audio input selection in OSD Source
Setup. (If a digital audio input is also selected, it will be the
priority to the Main Room for Surround Mode processing.)
c) Conrm Zone PRE-OUT or OUT connections to an external
amplier.
d) Conrm OSD Zone 2 Controls Setup.
e) Conrm Zone 2 speaker connections.
f) Conrm Zone 2 volume is turned up and un-muted.
g) Conrm Zone 2 source is selected, turned on and playing.
No Video a) Conrm Zone 2 source composite and/or S-Video
connections.
b) Conrm Zone 2 composite and/or S-Video connection to
Zone 2 Video Display.
c) Conrm proper Input is selected on the Zone 2 Video
Display.
d) Conrm composite or S-Video Input is selected in Setup
Menu
e) Conrm source is selected, turned on and playing.
No IR Control d) Conrm connection of Zone 2 IR Receiver (if used).
b) Conrm direct ‘line-of-sight’ from the remote to the IR
Sensor on the M80 Front Panel.
c) Block any bright light or high ambient light that may be
saturating the IR Sensor with light noise.
a) Replace batteries in remote.