Table of contents
1
Supplementary Operating Instructions for Bluetooth Con‐
trol......................................................................................... 4
1.1 Description of Bluetooth Functionality.......................... 4
1.2 Safety............................................................................ 4
1.3 Prerequisites................................................................. 6
1.4 App Test Operation with Pump Simulation................... 7
1.5 Establishing a Bluetooth Connection............................ 7
1.5.1 Enable Bluetooth functionality on both devices......... 8
1.5.2 Initiating a Search for Bluetooth Devices on the
Smart Device.............................................................
8
1.5.3 Couple the smart device to a pump that has been
found.......................................................................... 8
1.5.4 Connecting the Smart Device to a pump that has
been found................................................................. 9
1.5.5 Disconnecting the Smart Device from the Metering
Pump....................................................................... 10
1.6 Setting and Operating................................................. 10
1.7 Further Information / Functions................................... 11
1.7.1 Bluetooth LED Signal Code..................................... 11
1.7.2 Finding a Metering Pump Amongst Several
Metering Pumps....................................................... 11
1.7.3 Managing the
‘Connect to Device’
List................... 11
1.7.4 Saving and Restoring the Pump Configuration........ 12
1.7.5 Bluetooth Address................................................... 13
1.8 Troubleshooting.......................................................... 13
1.9 Extract EC / EU Declaration of Conformity gamma/ X
with Bluetooth............................................................. 14
2 Supplementary Operating Instructions CANopen............... 15
2.1 About this pump.......................................................... 15
2.2 Control Elements........................................................ 16
2.3 Installation, electrical.................................................. 16
2.4 Emergency mode........................................................ 18
2.5 Troubleshooting.......................................................... 18
2.6 Accessories................................................................ 19
2.7 Appendix..................................................................... 19
2.7.1 Object list metering pump gamma/ X, GMXa.......... 19
2.7.2 EMERGENCY.......................................................... 34
2.7.3 Object explanations................................................. 36
2.7.4 Changing the CANopen node address (node ID).... 38
2.7.5 Transfer rate (baud rate).......................................... 38
2.7.6 Calibration, explanations......................................... 38
2.7.7 Firmware update...................................................... 39
2.7.8 Data storage............................................................ 39
2.7.9 Received directives / standards............................... 39
3 Supplementary Operating Instructions for Modbus RTU.... 40
3.1 About this Modbus pump............................................ 40
3.2 Control elements......................................................... 41
3.3 Electrical installation................................................... 42
3.4 "Modbus RTU" implementation................................... 43
3.4.1 "Modbus RTU" message structure.......................... 44
3.5 Device monitoring....................................................... 46
Table of contents
2
To Next Page
Loading...
Need help?
General