ProMinent gamma/ X Supplementary Operating Instructions

If you have another Android smart device or
Android operating system, you can still try to see if
the app works correctly with it. However ProMinent
has not tested this.
1.4 App Test Operation with Pump Simulation
It is possible to check how the app works even without a metering
pump. Use the
‘GMXa simulation’ pump simulation to do so.
1. Enable Bluetooth functionality on the smart device - see
operating instructions for the smart device.
2. Press
‘gamma/ X’ on the app.
ð
The ‘Connect to device’ window appears after a few sec‐
onds with the ‘GMXa simulation’ "device".
3. Press
‘GMXa simulation’ .
ð
A
‘Simulation è Password’ appears.
4. Enter any 4 digits and press
[Enter] .
ð
Now you can gain an impression of how certain setting
options on the app look and work.
An animation shows whether the simulated pump is currently
"pumping" or not.
1.5 Establishing a Bluetooth Connection
To establish a Bluetooth connection between the metering pump
and the smart device:
1 - Enable Bluetooth functionality on both devices
2 - Initiate a search for Bluetooth devices nearby on the smart
device
3 - Couple the smart device to a pump that has been found
4 - Connect the smart device to a pump that has been found
Fig. 2: Animation
Supplementary Operating Instructions for Bluetooth Control
7

ProMinent gamma/ X Specifications

General

Protection class	IP65
Max. Pressure	25 bar
Power supply	100-230 V, 50/60 Hz
Material of pump head	PVDF, Stainless steel
Temperature range	-10 °C to +45 °C
Type	Diaphragm dosing pump
Stroke length	Adjustable
Stroke frequency	max. 180 strokes/min
Materials in contact with the medium	PVDF, PTFE, stainless steel
Control	Manual, external control via contacts or 0/4-20 mA signal
Control Options	External, potential-free contacts, 0/4-20 mA
Dosing Accuracy	±2%