Promise Technology SMARTSTOR NS4300N User Manual

SmartStor NS4300N Product Manual
122
Setting up Macintosh Access
Setting up Macintosh Service
To set up access from a Macintosh PC:
1. In the Tree, click the + beside the File & Print icon.
2. Click the Protocol Control icon, then click the Macintosh tab.
3. Click the Enable button.
4. Optional. Type a message in the Login Message field.
5. Click the OK button to save your settings.
The optional login message appears on the Welcome screen when you log
into SmartStor from a Macintosh PC.
Setting up File Sharing
To set up Macintosh file sharing:
1. In the Tree, click the Sharing Setup icon, then click the Windows/
Macintosh/FTP Sharing tab.
2. Check the Macintosh protocol box.
3. Choose a folder from the Folder Name dropdown menu.
4. In the User/Group list, highlight the name of a user or group.
Group names are preceded by the @ character.
5. Under Permissions, choose a permission level for this user or group:
• Deny Access – Visible only, cannot open
• Read Only
• Read and Write – Default
6. Click the OK button to save your settings.
7. In the confirmation box, click the OK button.
You can now access the specified folder from a Macintosh PC.
See “Chapter 3: Connecting to the SmartStor” on page 27 for information
about the settings that you must make on your Macintosh PC.
Login Message

Promise Technology SMARTSTOR NS4300N Specifications

General

Brand	Promise Technology
Model	SMARTSTOR NS4300N
Category	Storage
Language	English