Promise Technology SMARTSTOR NS4300N - Setting up the Print Server on Smartstor

SmartStor NS4300N Product Manual
40
Setting up the Print Server on SmartStor
To set up the SmartStor’s print server:
1. Start PASM.
See “PASM in your Browser” on page 21, “PASM in SmartNAVI” on
page 22, or “PASM in Bonjour” on page 24.
2. In the Tree, on the left side of the PASM screen, click the + beside the File &
Print icon to expand the Tree.
3. Click the Protocol Control icon, then click the Printer Server tab.
4. Click the Enable option button beside Printer Server.
5. Click the OK button to save your settings.