Promise Technology SMARTSTOR NS4300N User Manual

SmartStor NS4300N Product Manual
170
Responding to Events
All events are reported in the Event Log. Most events are simply reports that the
SmartStor is responding to your commands.
Many events are also reported via email. The SmartStor’s buzzer sounds for
serious events that require your attention.
A list of event categories is shown below:
• File System (page 170)
• NAS Replication (page 170)
• Snapshots (page 171)
• System (enclosure) (page 171)
• Disk Drives (page 171)
• RAID Volumes (page 172)
Reported Event Corrective Action
File System
File system of volume X
content errors! Check the
system before continuing.
The file system has a problem. Reboot the SmartStor
and check file system again. If the event appears
again, the file system has crashed. Rebuild the file
system. See page 168.
File system capacity
usage of volume X is over
90%.
Reduce the number or size of the files or expand the
volume size. See “Migrating a RAID Volume” on
page 131.
File system capacity
usage of volume X is
100%.
Rebuilding file system... The file system is being rebuild by user action.
NAS Replication
NAS replication is
completed.
NAS replication has finished. Normal.
System is busy. NAS
replication is abort!
The RAID Volume is currently formatting, rebuilding,
or migrating. Wait until this process is done. Then try
the replication again.
System is doing another
replication. NAS
replication is abort!
The SmarStor is currently doing a replication. Wait
until the current replication is done. Then try the
second replication again.
NAS replication is failed! There is a failed network connection between the two
SmartStors. Correct the problem and try again. See
page 174.

Promise Technology SMARTSTOR NS4300N Specifications

General

Brand	Promise Technology
Model	SMARTSTOR NS4300N
Category	Storage
Language	English