SmartStor NS4300N Product Manual
172
S.M.A.R.T threshold
exceeded on disk X
Check the disk drives. See page 164. Replace the
failed drive. See page 165.
BSL update on disk X at
LBA [address]
Bad sector on a disk drive. Check the disk drives.
See page 164. Replace the disk drive if it continues
to receive BSL updates.
BSL log disk X at LBA
[address] cleared
Check the disk drives. See page 164.
Delete Spare Disk Delete a spare drive. Normal.
RAID Volumes
Create [RAID name,
RAID level and X number
of disk drives]
Create a RAID Volume. Normal.
Delete RAID X Delete a RAID Volume. Normal.
Migration or Rebuilding
on array X started.
RAID Volume Migration or Rebuild has started.
Normal.
Migration or Rebuilding
on array X at Y%.
Progress report on RAID Volume Migration or
Rebuild. Normal.
Migration or Rebuilding
on array X paused at Y%.
RAID Volume Migration or Rebuild was paused
temporarily by user action.
Migration or Rebuilding
on array X resumed at
Y%.
RAID Volume Migration or Rebuild was paused and
then resumed by user action.
Migration or Rebuilding
on array X completed.
RAID Volume Migration or Rebuild has finished.
Normal.
Migration or Rebuilding
on array X aborted at Y%
RAID Volume Migration or Rebuild was aborted
(stopped) by user action.
Migration or Rebuilding
on array X aborted at Y%
because of error.
RAID Volume Migration or Rebuild has aborted
(stopped) because of an error. Check the disk drives.
See page 164. Check the RAID Volume. See
page 166.
RAID status: "OFFLINE".
The NS4300N X volume
Y is offline.
Check the disk drives. See page 164. Replace the
failed drive. See page 165. Create a new RAID
Volume. See page 130.
RAID status: "CRITICAL".
The NS4300N X volume
Y is not functioning
correctly.
Check the disk drives. See page 164. Replace the
failed drive. See page 165. The RAID Volume will
rebuild automatically.
Reported Event Corrective Action
To Next Page
Loading...
Need help?
General
