2. To use LAN:
- The LAN, select Internet (LAN) and press [OK].
See also
• To physically connect the LAN to the base, see Connection Diagram on page 19.
How to Set LAN Parameters
LAN settings can only be performed if the machine was actually connected to the LAN
at power-up.
To set the parameters of the LAN:
1. From the home screen:
Press and select the path: Advanced Settings Settings Communication
settings LAN settings
The DHCP configuration is displayed.
2. Select Auto to automatically configure the LAN (recommended).
10
Configuring your Mailing System
191
| Page 191 | Apr-28-2023 03:14 |
To Next Page
Loading...
