How to Select a Permit
To select a Permit:
1. As a user:
Press and then select PPI.
The PPI management screen is displayed.
2. Select the PPI in the list using the arrows.
3. Press [OK] to validate your selection and return to the Customize Stamp screen.
Choosing a Weighing Mode
Depending on the options that are installed in your Mailing System, several weighing
methods are available.
You can also enter the weight manually if you know it: see How to Enter the Weight
Manually on page 68.
Weighing modes
Depending on the type of mail you want to process, choose a weighing method
according to the recommendations in the table below.
Standard weighing (if available) is activated by default on mailing system start.
Select the method...For weighing...
• Standard WeighingItems one by one
• Differential WeighingItems stacked on the Weighing Platform
• Manual Weight EntryItems exceeding WP capacity (see
Specifications on page 269)
3
Processing Mail
65
| Page 65 | Apr-28-2023 03:14 |
To Next Page
Loading...
