Choosing Stamp Type3.2
Type of Process and Type of Stamp
The table below indicates the type of stamp to choose, depending on the type of process
you want to apply to each set of mail.
The column on the right indicates, for each Type of stamp, the options available for
each type of stamp.
If you do not set any parameter, the mailing system uses default values.
Available Stamp optionsType of stampType of process
• Rate
• Weight
• Date format
• Text (optional)
• Slogan (optional)
• Print offset (optional)
[Standard]
(Printing [Standard]
Mail on page 34)
Applying postage to
outgoing mail
• Permit Mail
• Slogan (optional)
• Text (optional)
• Print offset (optional)
• Weight
[Permit Mail]
(Printing [Permit
Mail] on page 48)
Sending Prepaid mail:
• No weight, postage
amount = 0
• Date format
• Print offset (optional)
[Date Correction]
(Printing [Redate]
Mode on page 55)
Re-dating a mail piece:
• Amount
• Date (optional)
• Print offset (optional)
[Amount Correction]
(Printing [Amount
Correction] Mode on
page 52)
Correcting a postage
amount (print on back of
envelope):
• Print date and/or 'Received'
• Print offset (optional)
[Received]
(Printing Incoming
Mail with [Received]
Mode on page 44)
Printing 'Received' or the
date on incoming mail:
• Counter reset
• Turn sealer off (if installed)
[No printing]
(Running [No
Printing] Mail) on
page 46
Counting by feeding: (using
optional feeder)
31
| Page 31 | | Apr-28-2023 03:14 |
3
Processing Mail
To Next Page
Loading...
