Specific application (see Piece
Counting)
n.aCounting by weighing:
The system selects [Standard] type of stamp at start up by
default.
Customizing Your Stamp
When processing mail you will be required to select the 'Type of stamp' you need. For
example, you can select “Standard” to print postage, or “Received” to print the date
on incoming mail, or “No printing” for seal only applications.
For each 'Type of stamp' you select, the Mailing System displays all the specifications
- and only those specifications - for the type of process you will use.
Home Screen and Configuration Menu
Each type of stamp is associated to:
• A specific home screen that displays current stamp configuration (weight, postage,
etc.).
• A specific imprint configuration menu that allows you to set stamp parameters.
To directly gain access to the configuration menu of the type of
stamp, press the shortcut key on the control panel.
Your system has five shortcut keys for direct access to save time.
You can eliminate key strokes to add or check funds, display the
report list, select a rate, customize the stamp and change
weighing mode.
32
| Page 32 | Apr-28-2023 03:14 |
3
Processing Mail
To Next Page
Loading...
Need help?
General
