2. Insert the envelope into the mail path against the rear-guide wall, with the side
to be printed facing upwards.
The Mailing System applies the imprint and the mail piece is ejected.
How to Set [No Printing] Mail processing
This section describes how to use the [No Printing] type of stamp, for:
• Only conveying mail, for counting or testing purposes.
Main setting:
1. Make sure you are on the home screen of the [No Printing] type of stamp.
The type of stamp is indicated at the top of the home screen as illustrated.
46
| Page 46 | Apr-28-2023 03:14 |
3
Processing Mail
To Next Page
Loading...
