quadient iX-3 Series

2. Check or change the type of stamp, if you are not in [No Printing] mode.
Press to access the stamp screen:
To change the type of stamp, select the Type line, press [OK] and then select [No
Printing] in the Type of stamp screen and press [OK].
To select an option in the screen:
- Highlight the option using the arrow keys and
- Then press to validate your selection.
3.
Press or to return to the home screen.
On the [No Printing] home screen:
1.
Press . System motors start running.
2. Insert the envelope into the mail path against the rear-guide wall.
3. The Mailing System does not apply postage and the envelope is ejected.
3
Processing Mail
47
| Page 47 | Apr-28-2023 03:14 |