Frequently Asked Questions
System check list:
AnswerQuestion...
Press and press Funds Used/Funds Available
to check your funds balance.
To add funds, see How to Add Funds to the PSD
Meter on page 97.
Do I have enough postage?
For sealing while printing the envelopes.
For moistener-equipped hand-feed tables, see
Filling the Moistener Option on page 239.
Is the sealing/moistening device
properly filled?
(if installed)
Before laying envelope(s) on the Weighing
Platform, your Home Screen should display 00 lb
0.0 oz. If __lb _._oz is displayed, perform a 'rezero'
of the WP.
See How to Zero the Weighing Platform on page
184.
Is the Weighing Platform
properly zeroed?
To display the level of ink in the printing headset,
see How to Display Ink Level and Cartridge Data
on page 230.
Is there enough ink in the
cartridge?
You can be warned when the available funds gets below a preset
value (see How to Set the Low-Funds Threshold on page 183).
30
| Page 30 | Apr-28-2023 03:14 |
3
Processing Mail