1. From the home screen:
Press and select the path: Advanced Settings Settings Date
Management Automatic Date Advance
The Auto date advance screen is displayed.
2. Press [OK].
3. Select ON and press [OK] to enable the Auto Date Advance function.
4. Select Set Hours, enter the Automatic Date Advance time (00:00 hours is not
allowed) and press [OK].
5. Select Set working days, following by the day number on the keypad to
select/deselect each day, and then press [OK].
6.
Press to exit.
196
| Page 196 | Apr-28-2023 03:14 |
10
Configuring your Mailing System
To Next Page
Loading...
