1. Display the list of text.
Press and select the path: Imprint left or Imprint right
Select Text List. The list of available text messages is displayed.
2. Select a message and press [OK].
The Text Management screen is displayed.
3. Select Modify a text.
4. You can change the text message and press [OK] to display the next screen (Use
[C] key to clear characters).
5. You can change the text name and press [OK] to validate.
The system updates the message.
11
Options and Updates
209
| Page 209 | Apr-28-2023 03:14 |
To Next Page
Loading...
