If your hand feed table is equipped with a moistener, you can close the envelopes by
sliding the flap under the moistener brush while feeding them into the base mail path.
Do not attempt to seal self-adhesive envelopes. Use standard
flap envelopes.
Cleaning the Brushes and Sponge (Moistener)
To avoid sealing issues:
• Keep fresh water in the water reservoir.
• Clean the Brush Assembly weekly with fresh water.
• Rinse out the sponge with fresh water weekly.
• Replace the brush assembly when the moistener is not moistening properly.
• Replace the sponge when it begins to break down and not soak up water properly.
To clean the brushes and sponge of the feed table moistener:
12
Maintenance
237
| Page 237 | Apr-28-2023 03:14 |
To Next Page
Loading...
