1. From the home screen:
Press and select the path: Advanced Settings Maintenance Process
& Diagnostics Processes Withdraw a PSD
The Withdraw meter screen is displayed.
2. Type the withdrawal PIN code using the keyboard and press [OK].
3.
Press [OK] or the [Sleep/Wake] button ( ) to turn the system to Sleep or Soft-off
mode.
4. ONLY at that stage, disconnect the system power cord from the power socket.
5. Open the cover of the base, then the cover of the meter. Pull the meter towards
the front of the base to disengage it from the base connector.
6. Remove the meter from the Mailing System base.
12
Maintenance
243
| Page 243 | Apr-28-2023 03:14 |
To Next Page
Loading...
