2. Check or change the type of stamp, if you are not in [Redate] mode.
Press to access the Customize stamp screen:
The type of stamp is indicated on line 2 of the screen.
To change the type of stamp, select the Type line, press [OK] and then select
[Redate] in the Type of stamp screen and press [OK].
To change the date or date format from the Customize stamp screen as follows:
Select Date and then select a date option in the Date Advance Screen. Select
Today's date if you do not want to print with date advance. Then, press [OK]. For
more details, see How to Change the Date on page 79.
Press or to return to the home screen.
On the [Redate] home screen:
1.
Press . System motors start running.
3
Processing Mail
57
| Page 57 | Apr-28-2023 03:14 |
To Next Page
Loading...
