Imprint Memories4.2
The Imprint Memories are presets for your stamp types.
As a user, you can quickly recall a saved setting to simplify operation and save time
(see Using Imprint Memories on page 186).
As a supervisor, you can create, edit/modify or delete an Imprint Memory.
Each Imprint Memory is identified by a name and a number.
The system displays on the home screen the name of the current Imprint Memory.
How to Save an Imprint Memory
Imprint Memories are presets for your stamp types. Each Imprint Memory is identified
by a name and a number. The Homescreen displays the name of the current Imprint
Memory.
If your mail requires different settings such as specific postal rate and text and/or
slogan and department to charge, then the imprint memories are the solution: all your
settings are stored in a single memory. Highly recommended for repetitive tasks.
• Standard Imprint Memory: Text, Slogan, Weight (option),
Rate, Account Number (if any).
• Imprint Memory are limited to a total of nine.
• Once created, an Imprint Memory cannot be deleted, only
edited.
• To edit or change an Imprint Memory, you make the
changes to an existing Imprint Memory and save the
changes under a different name.
Prepare the job that you want to save as imprint memory (Rate, Slogan, Text).
Please refer to the following sections to prepare your job: How to Select a Rate on
page 141, How to Add (or Cancel) a Slogan on the Stamp on page 210, How to Add (or
Cancel) a Text on the Stamp on page 204.
To save (create) an Imprint Memory:
84
| Page 84 | Apr-28-2023 03:14 |
4
Imprints
To Next Page
Loading...
Need help?
General
