How to Edit an Imprint Memory
Imprint Memories are presets for your stamp types. Each Imprint Memory is identified
by a name and a number. The Homescreen displays the name of the current Imprint
Memory.
If your mail requires different settings such as specific postal rate and text and/or
slogan and department to charge, then the imprint memories are the solution: all your
settings are stored in a single memory. Highly recommended for repetitive tasks.
• Standard Imprint Memory: Text, Slogan, Weight (option),
Rate, Account Number (if any).
• Imprint Memory are limited to a total of nine.
• Once created an Imprint Memory cannot be deleted.
• To edit or change an Imprint Memory, you make the
changes to an existing Imprint Memory and save the
changes under a different name.
Prepare the job that you want to save as imprint memory (Rate, Slogan, Text).
Please refer to the following sections to prepare your job: How to Select a Rate on
page 141, How to Add (or Cancel) a Slogan on the Stamp on page 210, How to Add (or
Cancel) a Text on the Stamp on page 204.
To edit an Imprint Memory:
1. From the home screen:
Long press .
The imprint memories list is displayed.
2. Select the existing imprint memory old which you want to edit. Press [OK].
The message confirmation to save account info is displayed.
86
| Page 86 | Apr-28-2023 03:14 |
4
Imprints
To Next Page
Loading...
