QuadTech 1730T - Interface; CALCulate Limit Upper and Math Commands

Page 82 of 110 150821/A4 Interface
3.1.5.9 CALCulate{1⏐2}:LIMit:UPPer[:DATA]
Instruction: CALCulate{1⏐2}:LIMit:UPPer[:DATA]
Parameter: {The upper limit value⏐MAXimum⏐MINimum}
Return Value: The upper limit value, the format is <NR3> (Floating point)
Function: Set or query the upper limit value.
Description: MINimum -9.999E14
MAXimum 9.999E14
3.1.5.10 CALCulate{1⏐2}:MATH:EXPression:CATalog
Instruction: CALCulate{1⏐2}:MATH:EXPRession:CATalog
Parameter: None
Return Value: Bias absolute value (DEV) or percent value (PCNT)
Function: Send back the parameter to use with
CALCulate{1⏐2}:MATH:EXPRession:NAME
3.1.5.11 CALCulate{1⏐2}:MATH:EXPRession:NAME
Instruction: CALCulate{1⏐2}: MATH:EXPRession:NAME
Parameter: {DEV⏐PCNT}
Return Value: {DEV⏐PCNT}
Function: Set the Compare function value to deviation or percent deviation.
3.1.5.12 CALCulate{1⏐2}:MATH:STATe
Instruction: CALCulate{1⏐2}:MATH:STATe
Parameter: {ON (1)⏐OFF (0)}
Return Value: {1⏐0}
Function: Set or query if CALCulate{1⏐2}: MATH:EXPRession:NAME is ON or OFF.
Description: ON (1) Turn on CALCulate{1⏐2}: MATH:EXPRession:NAME
OFF (0) Turn off CALCulate{1⏐2}: MATH:EXPRession:NAME
3.1.5.13 CALCulate{1⏐2}: PATH?
Instruction: CALCulate{1⏐2}: PATH?
Parameter: None
Return Value: FORM, MATH, LIM
Function: Send back CALCulate subsystem according to performance sequence of
CALCulate subsystem.