Guardian 2500 Series
AC/DC/IR Hipot Tester
Instruction Manual
Form 150319/A8
QuadTech, Inc., 1999
Domestic Sales 800-253-1230
For additional contact information please visit our website
www.quadtech.com
The material in this manual is for informational purposes only and is subject to change, without notice.
QuadTech assumes no responsibility for any error or for consequential damages that may result from the
misinterpretation of any procedures in this publication.
WARNING
Potentially dangerous voltages may be present on front and rear panel terminals. Follow all warnings in
this manual when operating or servicing this instrument. Dangerous levels of energy may be stored in
capacitive devices tested by this unit.
Always make sure the high voltage indicator is not on when connecting or disconnecting the device under
test.
Product will be marked with this symbol (ISO#3684) when it is necessary for the user to refer to
the instruction manual in order to prevent injury or equipment damage.
Product marked with this symbol (IEC417) indicates presence of direct current.
Product will be marked with this symbol (ISO#3684) when voltages in excess of 1000V are
present.
To Next Page
Need help?
General
