9.5.1.3 show vmtracer vm
The command displays VMs interfaces (Vnics) that are accessible to the switch interfaces where the VM
Tracer interface mode is enabled.
Syntax
show vmtracer vm [detail <vm_name>]
<vm_name> - displays information for the specific VM.
Default Setting
None
Command Mode
Privileged Exec
Display Message
VM Name: the name of attached VM.
VM Adapter: the adapter name of the VM interface.
Interface: the associated switch interface of attached VM.
VLAN: the VLAN value of the VM interface.
Vnic: the adapter name of the VM interface.
Mac: the network mac address of vnic.
Portgroup: the portgroup of the VM.
Vlan: the vlan value of the VM interface.
Switch: the vSwitch of the VM.
Host: the host of the VM.
To Next Page
Loading...