Quanta Computer QuantaMesh - Priority-Based Flow Control; Show Dcb Priority-Flow-Control; Priority-Flow-Control Mode

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Data Center Bridging Commands
991
9.2 Priority-based Flow Control
9.2.1 show dcb priority-flow-control
Display the PFC information of a given interface or all interface.
Syntax
show dcb priority-flow-control {<interface> | all }
Default Setting
None
Command Mode
Privileged Exec
9.2.2 priority-flow-control mode
Set Priority-Flow-Control (PFC) to be enabled, disabled, or atuo on the interface.
Both PFC and 802.3x flow control are enabled, PFC will take effect.
Syntax
priority-flow-control mode { on | auto}
no priority-flow-control mode
no - This command auto the Priority-Flow-Control (PFC) on the interface.
Default Setting
Auto
Command Mode
DCB (Data Center Bridging) interface mode
i