Quanta Computer QuantaMesh - Static Mac Filtering Commands; Show Commands

To Next Page

To Previous Page

UANTA COMPUTER INC.

Layer 2/3/4 Managed Switch

QuantaMesh | Switching Commands

457

5.15 Static MAC Filtering Commands

5.15.1 Show Commands

5.15.1.1 show mac-addr-table static

This command displays the Static MAC Filtering information for all Static MAC Filters. If you select <all>,

all the Static MAC Filters in the system are displayed. If you supply a value for <macaddr>, you must

also enter a value for <vlan-id>, and the system displays Static MAC Filter information only for that MAC

address and VLAN.

Syntax

show mac-addr-table static [<macaddr> <vlan-id>]

<macaddr> - Static MAC address.

<vlan-id> - VLAN ID. The range of VLAN ID is 1 to 4093.

Default Setting

None

Command Mode

Privileged Exec

Display Message

MAC Address: Is the MAC Address of the static MAC filter entry.

VLAN ID: Is the VLAN ID of the static MAC filter entry.

Source Port(s): Indicates the source port filter set's slot and port(s).