Quanta Computer QuantaMesh - Show Evb Status

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Data Center Bridging Commands
999
9.4.2 show evb status
This command displays EVB function interface parameter on system.
Syntax
show evb status <slot/port>
Default Setting
None
Command Mode
Privileged Exec
Display Message
Admin Mode: Display the administrative mode of this interface
Remote Sync: Displays the synchronization status
Support Capability: Displays the support capabilities of EVB on this interface.
Configure Capability: Displays the configured capabilities of EVB on this interface.
Support Mode: Display the support mode of EVB on this interface.
Configure Mode: Display the configured mode of EVB on this interface.
Configure RTE: Display the configured RTE of EVB on this interface.
Current RTE: Display the current RTE of EVB on this interface.