Quanta Computer QuantaMesh - Configure; Disconnect

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
488
5.16.12 configure
This command is used to activate global configuration mode.
Syntax
configure
Default Setting
None
Command Mode
Privileged Exec
5.16.13 disconnect
This command is used to close a telnet session.
Syntax
disconnect {<0-58> | all}
<0-58> - telnet session ID.
all - all telnet sessions.
Default Setting
None
Command Mode
Privileged Exec