Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
5.15.2 Configuration Commands
5.15.2.1 macfilter
This command adds a static MAC filter entry for the MAC address <macaddr> on the VLAN <vlan-id>.
The value of the <macaddr> parameter is a 6-byte hexadecimal number in the format of
b1:b2:b3:b4:b5:b6.
The restricted MAC Addresses are: 00:00:00:00:00:00, 01:80:C2:00:00:00 to 01:80:C2:00:00:0F,
01:80:C2:00:00:20 to 01:80:C2:00:00:21, and FF:FF:FF:FF:FF:FF. The <vlan-id> parameter must
identify a valid VLAN. You can create up to 100 static MAC filters.
Syntax
macfilter <macaddr> <vlan-id>
no macfilter <macaddr> <vlan-id>
<macaddr> - Specified a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
<vlan-id> - VLAN ID. The range of VLAN ID is 1 to 4093.
no - This command removes all filtering restrictions and the static MAC filter entry for the MAC
address <macaddr> on the VLAN <vlan-id>.
Default Setting
None
Command Mode
Global Config
To Next Page
Loading...