10.1.3 show openflow installed flows
This command displays the installed flows information from OpenFlow Controller.
Syntax
show openflow < instance-id > installed flows
Default Setting
None
Command Mode
Privileged EXEC
Examples:
(Quanta) #show openflow 1 installed flows
Flow 0000000B type "1DOT0"
Match criteria:
Flow table 24 : Priority 65535
Ingress port 0/1 : Src MAC 00:00:00:00:00:01 : Dst MAC 00:00:00:00:00:02
VLAN 5 : VLAN prio 3 : Ether type 800
IP proto 6 : Src IP 1.1.1.1 : Dst IP 2.2.2.2
Src IP port 12345 : Dst IP port 80 : TOS 16
Actions:
Egress port 0/3
Status:
Duration 131 : Idle 125 : installed in hardware 1
To Next Page
Loading...