Quanta Computer QuantaMesh - Configuration Commands; Openflow Instance; Openflow Enable;Disable

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | OpenFlow Commands
1016
10.2 Configuration Commands
10.2.1 OpenFlow Instance
This command enters OpenFlow instance.
Syntax
openflow instance <instance-id>
Default Setting
None
Command Mode
Global Config
10.2.2 OpenFlow Enable/Disable
To configure admin mode of OpenFlow instance.
Syntax
enable
no enable
Default Setting
Disable
Command Mode
OpenFlow Instance Mode