Quanta Computer QuantaMesh - Management Options; Command Line Console Interface through the Serial Port or Telnet

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Introduction
14
1.3 Management Options
The system may be managed by using one Service Ports through a Telnet, SNMP function and using
the console port on the front panel through CLI command.
1.4 Command Line Console Interface through the Serial Port or
Telnet
You can also connect a computer or terminal to the serial console port or use Telnet to access the
Switch. The command-line-driven interface provides complete access to all switch management
features.