Quanta Computer QuantaMesh - Configuration Commands

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | IP Multicast Commands
834
7.2.2 Configuration Commands
7.2.2.1 ip igmp
This command sets the administrative mode of IGMP in the router to active.
Syntax
ip igmp
no ip igmp
no - This command sets the administrative mode of IGMP in the router to inactive.
Default Setting
Disabled
Command Mode
Global Config
This command sets the administrative mode of IGMP on an interface to active.
Syntax
ip igmp
no ip igmp
no - This command sets the administrative mode of IGMP on an interface to inactive.
Default Setting
Disabled
Command Mode
Interface Config